We received some customer complaint, so we were to search for the product's targa, but it was 2 years ago. My superintendent, CS LIONG and I went to a store room to search for it. This is a tough job as the targa was for 2 years ago. We spent a lot of time and at last, it was found.
My chief engineer gave me some job today. It was to search and key in data from a checklist. It was quite tedious because you must search every page to locate a specific type of data. But it was a new thing to learn.
A mini project on analyzing "Open Short" was given by my supervisor. Open short is reject criteria occur in heat test. If the unit tested had no connection, it will be categorized as open short, as the wire in the unit was broken. I took X-Ray, gathered some data from the line's checklist in order to make it into a report. It is a 8D report, its purpose is to identify the problem, make containment action, analysis, simulation and also conclusion. This is a good analytical skill will be very useful in the future. I required quite a long time to do this report as I was new to kind of analytical type report.
No comments:
Post a Comment